RUS ENG
Experience, partnership, responsibility
1973 Year of foundation
3000 Products
56 100 000 m<sup>2</sup> per year
84% Export
Catalog

Assortment

Choose the fabric
Article
Title
Composition:
from % to %
0
100%
Coloristic design
Interlacement
Type finishing
Sphere of application
Assortment

Результы поиска

Article Title
Composition
from % to %
0
100%
Coloristic design Interlacement Type finishing
Sphere of application Assortment

More
Composition of raw materials, %: polyester - 100
: linen
Sphere of application:
  • - for lining, upper layer and inner elemen clothes for military and power personnel
Coloristic design:

one-coloure

bleached

Finishing: ВЗО
ВЗО - wind proof finishing

Wind proof finishing is produced mechanically and guarantees smooth surface and density, which, in its turn, reduces air permeability of the fabric

"АЛЕКСАНДРИЯ"

More
Composition of raw materials, %: polyester - 67, viscose - 33
: linen
Sphere of application:
  • - for military and specialized services uniforms
Coloristic design:

one-coloure

printed

bleached

Finishing: МО
МО - emollient finishing

Textile emollient is applied to the fabric. Emollient finishing gives soft and elegant stamp, smooth surface and increases elasticity and resilience. Emollient effect is resistant to washing and dry-cleaning

More
Composition of raw materials, %: cotton - 61, polyester - 39
: twill
Sphere of application:
  • - for military and specialized services uniforms
  • - for special-purpose clothes worn by personnel of national economic branches
  • - for special-purpose clothes worn by personnel of housing and communal services
  • - for special-purpose clothes worn by personnel of service and food industry
Coloristic design:

one-coloure

Finishing: ВО
ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

More
Composition of raw materials, %: polyester - 65, viscose - 35
: combined
Sphere of application:
  • - for military and specialized services uniforms
Coloristic design:

one-coloure

printed

Finishing: МО
МО - emollient finishing

Textile emollient is applied to the fabric. Emollient finishing gives soft and elegant stamp, smooth surface and increases elasticity and resilience. Emollient effect is resistant to washing and dry-cleaning

More
Composition of raw materials, %: cotton - 33, polyester - 67
: combined
Sphere of application:
  • - for military and specialized services uniforms
Coloristic design:

one-coloure

Finishing: МО+ВО
МО+ВО -

More
Composition of raw materials, %: polyester - 100
: linen
Sphere of application:
  • - for military and specialized services uniforms
  • - for special-purpose clothes worn by personnel of national economic branches
  • - for special-purpose clothes worn by personnel of housing and communal services
  • - for special-purpose clothes worn by personnel of service and food industry
  • - for every-day wear clothes, clothes for sports and leisure, fishing, hunting
Coloristic design:

one-coloure

printed

Finishing: ВО
ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

, ПлА
ПлА - film acrylate covering

Film colourless not-breathing covering, which guarantees waterproof properties and resistance to dust penetration. Water resistance is 300 – 750 mm of water column.

, ПлПУ
ПлПУ - film polyurethane covering

Film colourless not-breathing covering, which guarantees waterproof and wind proof properties. Water resistance is 400 – 1200 mm of water column.

, ПлПУМ
ПлПУМ - film polyurethane microcellular "breathing" covering

This film polyurethane microcellular "breathing" covering is white (or coloured) film, which can let through water molecules only in vapour state but not water drops. Water resistance is 350 – 700 mm of water column. Vapour permeability (breathing properties) are 5.0-10.0 mg/cm2/hour.

, ПлЛАМ
ПлЛАМ - film covering, membrane laminating

This is a special membrane covering used for long term protection against water and wind. The covering is used on the upper layer, which prevents clothes from getting wet and lets perspiration out. Water resistance is 5000 – 10000 mm of water column. Vapour permeability (breathing properties) are 5.0-12.0.0 mg/cm2/hour

, Пл3ЛАМ
Пл3ЛАМ - film covering, membrane laminating on knitted base

This is upper fabric + membrane + knitted mesh glued together with the help of special laminating technology. The knitted mesh from the lining side guarantees membrane protection against mechanical damage and serves as lining. These fabrics are use d for long term protection against water and wind. The covering is used on the upper layer, which prevents clothes from getting wet and lets perspiration out. Water resistance is 5000 – 10000 mm of water column. Vapour permeability (breathing propert ies) are 5.0-12.0.0 mg/cm2/hour

, ПлПУТ
ПлПУТ -

More
Composition of raw materials, %: polyester - 100
: combined
Sphere of application:
  • - for military and specialized services uniforms
  • - for special-purpose clothes worn by personnel of national economic branches
  • - for special-purpose clothes worn by personnel of housing and communal services
  • - for special-purpose clothes worn by personnel of service and food industry
  • - for every-day wear clothes, clothes for sports and leisure, fishing, hunting
Coloristic design:

one-coloure

printed

Finishing: ВО
ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

, ПлПУ
ПлПУ - film polyurethane covering

Film colourless not-breathing covering, which guarantees waterproof and wind proof properties. Water resistance is 400 – 1200 mm of water column.

, ПлПУМ
ПлПУМ - film polyurethane microcellular "breathing" covering

This film polyurethane microcellular "breathing" covering is white (or coloured) film, which can let through water molecules only in vapour state but not water drops. Water resistance is 350 – 700 mm of water column. Vapour permeability (breathing properties) are 5.0-10.0 mg/cm2/hour.

, ПлЛАМ
ПлЛАМ - film covering, membrane laminating

This is a special membrane covering used for long term protection against water and wind. The covering is used on the upper layer, which prevents clothes from getting wet and lets perspiration out. Water resistance is 5000 – 10000 mm of water column. Vapour permeability (breathing properties) are 5.0-12.0.0 mg/cm2/hour

, Пл3ЛАМ
Пл3ЛАМ - film covering, membrane laminating on knitted base

This is upper fabric + membrane + knitted mesh glued together with the help of special laminating technology. The knitted mesh from the lining side guarantees membrane protection against mechanical damage and serves as lining. These fabrics are use d for long term protection against water and wind. The covering is used on the upper layer, which prevents clothes from getting wet and lets perspiration out. Water resistance is 5000 – 10000 mm of water column. Vapour permeability (breathing propert ies) are 5.0-12.0.0 mg/cm2/hour

, МВО+ВЗО
МВО+ВЗО -

Up
ABOUT US | News | Catalog | Garments | CONTACTS
please wait...
Ok