Результы поиска

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

МО - emollient finishing

Textile emollient is applied to the fabric. Emollient finishing gives soft and elegant stamp, smooth surface and increases elasticity and resilience. Emollient effect is resistant to washing and dry-cleaning

АСО - antistatic finishing

Antistatic covering is applied to fabrics of synthetic filament, it reduces or eliminates electrification of synthetic fabrics, prevents static electricity accumulation and discharges when rubbing, crackling and sparking, excludes fabric sticking to body. Electrical resistance is 10 raised to 9 power- 10 to 11 power Ohm.

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

МВО - oil and water resistant finishing

Owing to oil proof finishing the fabric prevents water, fat and oily liquids penetration, preserving its air and vapour permeability (the fabric facilitates perspiration). The fabric is tested by. "3М" method.

НМВО - petroleum and oil resistant finishing

Petroleum and oil proof finishing prevents penetration of water, oil, heavy fraction petroleum products without reducing its air permeability (perspiration vapours go out easily). Tested by standard petroleum with drops application and evaluation acc ording to five-point scale.

шл+ВО -

АСО - antistatic finishing

Antistatic covering is applied to fabrics of synthetic filament, it reduces or eliminates electrification of synthetic fabrics, prevents static electricity accumulation and discharges when rubbing, crackling and sparking, excludes fabric sticking to body. Electrical resistance is 10 raised to 9 power- 10 to 11 power Ohm.

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

ПлА - film acrylate covering

Film colourless not-breathing covering, which guarantees waterproof properties and resistance to dust penetration. Water resistance is 300 – 750 mm of water column.

ПлПУ - film polyurethane covering

Film colourless not-breathing covering, which guarantees waterproof and wind proof properties. Water resistance is 400 – 1200 mm of water column.

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

ПлА - film acrylate covering

Film colourless not-breathing covering, which guarantees waterproof properties and resistance to dust penetration. Water resistance is 300 – 750 mm of water column.

ПлПУ - film polyurethane covering

Film colourless not-breathing covering, which guarantees waterproof and wind proof properties. Water resistance is 400 – 1200 mm of water column.

ПлПУМ - film polyurethane microcellular "breathing" covering

This film polyurethane microcellular "breathing" covering is white (or coloured) film, which can let through water molecules only in vapour state but not water drops. Water resistance is 350 – 700 mm of water column. Vapour permeability (breathing properties) are 5.0-10.0 mg/cm2/hour.

ПлЛАМ - film covering, membrane laminating

This is a special membrane covering used for long term protection against water and wind. The covering is used on the upper layer, which prevents clothes from getting wet and lets perspiration out. Water resistance is 5000 – 10000 mm of water column. Vapour permeability (breathing properties) are 5.0-12.0.0 mg/cm2/hour

Пл3ЛАМ - film covering, membrane laminating on knitted base

This is upper fabric + membrane + knitted mesh glued together with the help of special laminating technology. The knitted mesh from the lining side guarantees membrane protection against mechanical damage and serves as lining. These fabrics are use d for long term protection against water and wind. The covering is used on the upper layer, which prevents clothes from getting wet and lets perspiration out. Water resistance is 5000 – 10000 mm of water column. Vapour permeability (breathing propert ies) are 5.0-12.0.0 mg/cm2/hour

ПлПУТ -

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

ПлПУ - film polyurethane covering

Film colourless not-breathing covering, which guarantees waterproof and wind proof properties. Water resistance is 400 – 1200 mm of water column.

ПлПУМ - film polyurethane microcellular "breathing" covering

This film polyurethane microcellular "breathing" covering is white (or coloured) film, which can let through water molecules only in vapour state but not water drops. Water resistance is 350 – 700 mm of water column. Vapour permeability (breathing properties) are 5.0-10.0 mg/cm2/hour.

ПлЛАМ - film covering, membrane laminating

This is a special membrane covering used for long term protection against water and wind. The covering is used on the upper layer, which prevents clothes from getting wet and lets perspiration out. Water resistance is 5000 – 10000 mm of water column. Vapour permeability (breathing properties) are 5.0-12.0.0 mg/cm2/hour

Пл3ЛАМ - film covering, membrane laminating on knitted base

This is upper fabric + membrane + knitted mesh glued together with the help of special laminating technology. The knitted mesh from the lining side guarantees membrane protection against mechanical damage and serves as lining. These fabrics are use d for long term protection against water and wind. The covering is used on the upper layer, which prevents clothes from getting wet and lets perspiration out. Water resistance is 5000 – 10000 mm of water column. Vapour permeability (breathing propert ies) are 5.0-12.0.0 mg/cm2/hour

МВО+ВЗО -

МО - emollient finishing

Textile emollient is applied to the fabric. Emollient finishing gives soft and elegant stamp, smooth surface and increases elasticity and resilience. Emollient effect is resistant to washing and dry-cleaning

ПлТОП - film polyurethane "breathing" covering

This film polyurethane microcellular "breathing" covering with TOP-layer is white (or coloured) film, which can let through water molecules only in vapour state but not water drops. Water resistance is 700 – 1000 mm of water column. Vapour permea bility (breathing properties) are 3.5-6.0 mg/cm2/hour.

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

ПлА - film acrylate covering

Film colourless not-breathing covering, which guarantees waterproof properties and resistance to dust penetration. Water resistance is 300 – 750 mm of water column.

ПлПУ - film polyurethane covering

Film colourless not-breathing covering, which guarantees waterproof and wind proof properties. Water resistance is 400 – 1200 mm of water column.