Fabrics for clothing / for special needs clothes

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

МВО - oil and water resistant finishing

Owing to oil proof finishing the fabric prevents water, fat and oily liquids penetration, preserving its air and vapour permeability (the fabric facilitates perspiration). The fabric is tested by. "3М" method.

НМВО - petroleum and oil resistant finishing

Petroleum and oil proof finishing prevents penetration of water, oil, heavy fraction petroleum products without reducing its air permeability (perspiration vapours go out easily). Tested by standard petroleum with drops application and evaluation acc ording to five-point scale.

МО - emollient finishing

Textile emollient is applied to the fabric. Emollient finishing gives soft and elegant stamp, smooth surface and increases elasticity and resilience. Emollient effect is resistant to washing and dry-cleaning

ПлЛАМ - film covering, membrane laminating

This is a special membrane covering used for long term protection against water and wind. The covering is used on the upper layer, which prevents clothes from getting wet and lets perspiration out. Water resistance is 5000 – 10000 mm of water column. Vapour permeability (breathing properties) are 5.0-12.0.0 mg/cm2/hour

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

МО - emollient finishing

Textile emollient is applied to the fabric. Emollient finishing gives soft and elegant stamp, smooth surface and increases elasticity and resilience. Emollient effect is resistant to washing and dry-cleaning

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

МВО - oil and water resistant finishing

Owing to oil proof finishing the fabric prevents water, fat and oily liquids penetration, preserving its air and vapour permeability (the fabric facilitates perspiration). The fabric is tested by. "3М" method.

МО - emollient finishing

Textile emollient is applied to the fabric. Emollient finishing gives soft and elegant stamp, smooth surface and increases elasticity and resilience. Emollient effect is resistant to washing and dry-cleaning

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

ВЗО - wind proof finishing

Wind proof finishing is produced mechanically and guarantees smooth surface and density, which, in its turn, reduces air permeability of the fabric

ПлПУМ - film polyurethane microcellular "breathing" covering

This film polyurethane microcellular "breathing" covering is white (or coloured) film, which can let through water molecules only in vapour state but not water drops. Water resistance is 350 – 700 mm of water column. Vapour permeability (breathing properties) are 5.0-10.0 mg/cm2/hour.

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

МВО - oil and water resistant finishing

Owing to oil proof finishing the fabric prevents water, fat and oily liquids penetration, preserving its air and vapour permeability (the fabric facilitates perspiration). The fabric is tested by. "3М" method.

МВО - oil and water resistant finishing

Owing to oil proof finishing the fabric prevents water, fat and oily liquids penetration, preserving its air and vapour permeability (the fabric facilitates perspiration). The fabric is tested by. "3М" method.

МО - emollient finishing

Textile emollient is applied to the fabric. Emollient finishing gives soft and elegant stamp, smooth surface and increases elasticity and resilience. Emollient effect is resistant to washing and dry-cleaning

МВО - oil and water resistant finishing

Owing to oil proof finishing the fabric prevents water, fat and oily liquids penetration, preserving its air and vapour permeability (the fabric facilitates perspiration). The fabric is tested by. "3М" method.

МВО+ВЗО -

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

ПлПУМ - film polyurethane microcellular "breathing" covering

This film polyurethane microcellular "breathing" covering is white (or coloured) film, which can let through water molecules only in vapour state but not water drops. Water resistance is 350 – 700 mm of water column. Vapour permeability (breathing properties) are 5.0-10.0 mg/cm2/hour.

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

МВО - oil and water resistant finishing

Owing to oil proof finishing the fabric prevents water, fat and oily liquids penetration, preserving its air and vapour permeability (the fabric facilitates perspiration). The fabric is tested by. "3М" method.

МВО - oil and water resistant finishing

Owing to oil proof finishing the fabric prevents water, fat and oily liquids penetration, preserving its air and vapour permeability (the fabric facilitates perspiration). The fabric is tested by. "3М" method.

МВО - oil and water resistant finishing

Owing to oil proof finishing the fabric prevents water, fat and oily liquids penetration, preserving its air and vapour permeability (the fabric facilitates perspiration). The fabric is tested by. "3М" method.

ВЗО - wind proof finishing

Wind proof finishing is produced mechanically and guarantees smooth surface and density, which, in its turn, reduces air permeability of the fabric

ПлПУМ - film polyurethane microcellular "breathing" covering

This film polyurethane microcellular "breathing" covering is white (or coloured) film, which can let through water molecules only in vapour state but not water drops. Water resistance is 350 – 700 mm of water column. Vapour permeability (breathing properties) are 5.0-10.0 mg/cm2/hour.

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

МВО - oil and water resistant finishing

Owing to oil proof finishing the fabric prevents water, fat and oily liquids penetration, preserving its air and vapour permeability (the fabric facilitates perspiration). The fabric is tested by. "3М" method.

АСО - antistatic finishing

Antistatic covering is applied to fabrics of synthetic filament, it reduces or eliminates electrification of synthetic fabrics, prevents static electricity accumulation and discharges when rubbing, crackling and sparking, excludes fabric sticking to body. Electrical resistance is 10 raised to 9 power- 10 to 11 power Ohm.

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

МВО - oil and water resistant finishing

Owing to oil proof finishing the fabric prevents water, fat and oily liquids penetration, preserving its air and vapour permeability (the fabric facilitates perspiration). The fabric is tested by. "3М" method.

НМВО - petroleum and oil resistant finishing

Petroleum and oil proof finishing prevents penetration of water, oil, heavy fraction petroleum products without reducing its air permeability (perspiration vapours go out easily). Tested by standard petroleum with drops application and evaluation acc ording to five-point scale.

ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.