RUS ENG
Experience, partnership, responsibility
1973 Year of foundation
3000 Products
56 100 000 m<sup>2</sup> per year
84% Export
Catalog

Assortment

Choose the fabric
Article
Title
Composition:
from % to %
0
100%
Coloristic design
Interlacement
Type finishing
Sphere of application
Assortment

Fabrics for clothing / for special needs clothes

09С13-КВ

- Light, strong - Minimal shrinking

Film coating secures: * protection against natural factors (rain, wind, snow) * easy care

- Fabric with polyurethane film- waterproof- 300-750 mm of water column, depending on the number of film layers.

- Fabric with polyurethane film- waterproof- 400-900 mm of water column, depending on the number of film layers

Composition of raw materials, %: polyester - 100
Interlacement: basic rep
Assortment: - State Border Committee (REPUBLIC OF BELARUS)
- Ministry of Defence (Russian Federation)
- Federal Service of Corrections (Russian Federation)
Coloristic design:

one-coloure

printed

Sphere of application: - for special-purpose clothes worn by personnel of national economic branches
- for special-purpose clothes worn by personnel of housing and communal services
- for every-day wear clothes, clothes for sports and leisure, fishing, hunting
Type finishing:
Finishing Width, cm The surface density, g/m2  Recommendations for upkeep Notations
АСО
АСО - antistatic finishing

Antistatic covering is applied to fabrics of synthetic filament, it reduces or eliminates electrification of synthetic fabrics, prevents static electricity accumulation and discharges when rubbing, crackling and sparking, excludes fabric sticking to body. Electrical resistance is 10 raised to 9 power- 10 to 11 power Ohm.

150 210 To preserve finishing properties after washing a ready-made product must be ironed.
ВО
ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

150 123 To preserve finishing properties after washing a ready-made product must be ironed.
ПлА
ПлА - film acrylate covering

Film colourless not-breathing covering, which guarantees waterproof properties and resistance to dust penetration. Water resistance is 300 – 750 mm of water column.

150 137 Iron on the face.
ПлПУ
ПлПУ - film polyurethane covering

Film colourless not-breathing covering, which guarantees waterproof and wind proof properties. Water resistance is 400 – 1200 mm of water column.

150 137 Iron on the face.
ПлПУМ
ПлПУМ - film polyurethane microcellular "breathing" covering

This film polyurethane microcellular "breathing" covering is white (or coloured) film, which can let through water molecules only in vapour state but not water drops. Water resistance is 350 – 700 mm of water column. Vapour permeability (breathing properties) are 5.0-10.0 mg/cm2/hour.

155 178 Iron on the face.


Recommendations for upkeep
Maximum temperature 60°С. Mechanical effect - usual. Rinsing - usual. Wringing - usual.
Maximum temperature 40°С. Mechanical effect - usual. Rinsing - usual. Wringing - usual.
Maximum temperature 40°С. Mechanical effect - lowered. Rinsing - with gradual lowering of temperature. Wringing - lowered.
Do not bleach with chlorinated agents
Ironing with maximum temperature of pressing surface (lower iron plate) up to 150°С.
Drying in drum. Usual drying process В
Drying in drum. Drying with lower temperature
no drying in drum
Dry-cleaning in trichloroethane, monochloropentane and all the F-symbol solvents. Usual dry-cleaning
Up
ABOUT US | News | Catalog | Garments | CONTACTS
please wait...
Ok