RUS ENG
Experience, partnership, responsibility
1973 Year of foundation
3000 Products
56 100 000 m<sup>2</sup> per year
84% Export
Catalog

Assortment

Choose the fabric
Article
Title
Composition:
from % to %
0
100%
Coloristic design
Interlacement
Type finishing
Sphere of application
Assortment

Fabrics with special protective properties / biocide and antibacterial

06С22-КВ

- High-strength and resistance to wear - Long durability

- Windproof finishing guarantees flat fabric surface, which in its turn lowers air permeability of the fabric

- Fabric with polyurethane microcellular film, waterproof- more than 5000 mm of water column, “breathes” – vapour permeability not less than 3.5 mg/cm2/hour

- High protective properties, resistance to washing

Composition of raw materials, %: polyester - 100
Interlacement: twill
Assortment: - Ministry of Internal Affairs (REPUBLIC OF BELARUS)
- Ministry of Internal Affairs (Russian Federation)
- Boarder Troops (Russian Federation)
Type of drawing: набивной
Coloristic design:

one-coloure

Sphere of application: - for military and specialized services uniforms
- for special-purpose clothes worn by personnel of national economic branches
- for special-purpose clothes worn by personnel of housing and communal services
Type finishing:
Finishing Width, cm The surface density, g/m2  Recommendations for upkeep Notations
ВО
ВО - water resistant finishing

Owing to waterproof finishing the fabric does not moisten and protects against contact of water with the skin. The fabric is vapour permeable (facilitates perspiration), but does not leave moisture on the surface. Waterproof properties are tested by “spray-test” method.

150 245 To preserve finishing properties after washing a ready-made product must be ironed.
МВО
МВО - oil and water resistant finishing

Owing to oil proof finishing the fabric prevents water, fat and oily liquids penetration, preserving its air and vapour permeability (the fabric facilitates perspiration). The fabric is tested by. "3М" method.

150 245 To preserve finishing properties after washing a ready-made product must be ironed.
ПлЛАМ
ПлЛАМ - film covering, membrane laminating

This is a special membrane covering used for long term protection against water and wind. The covering is used on the upper layer, which prevents clothes from getting wet and lets perspiration out. Water resistance is 5000 – 10000 mm of water column. Vapour permeability (breathing properties) are 5.0-12.0.0 mg/cm2/hour

150 348 Iron on the face.
Пл3ЛАМ
Пл3ЛАМ - film covering, membrane laminating on knitted base

This is upper fabric + membrane + knitted mesh glued together with the help of special laminating technology. The knitted mesh from the lining side guarantees membrane protection against mechanical damage and serves as lining. These fabrics are use d for long term protection against water and wind. The covering is used on the upper layer, which prevents clothes from getting wet and lets perspiration out. Water resistance is 5000 – 10000 mm of water column. Vapour permeability (breathing propert ies) are 5.0-12.0.0 mg/cm2/hour

150 348 Iron on the face.
МВО+ВЗО
МВО+ВЗО -

150 245 To preserve finishing properties after washing a ready-made product must be ironed.













Recommendations for upkeep
Maximum temperature 40°С. Mechanical effect - usual. Rinsing - usual. Wringing - usual.
Maximum temperature 40°С. Mechanical effect - lowered. Rinsing - with gradual lowering of temperature. Wringing - lowered.
Ironing with maximum temperature of pressing surface (lower iron plate) up to 150°С.
Dry-cleaning in trichloroethane, monochloropentane and all the F-symbol solvents. Usual dry-cleaning
Drying in drum. Drying with lower temperature
no drying in drum
Wet goods must be hung for drying
Do not bleach with chlorinated agents
Dry-cleaning in trichloroethane, monochloropentane and all the F-symbol solvents. Usual dry-cleaning
Up
ABOUT US | News | Catalog | Garments | CONTACTS
please wait...
Ok